| 外型尺寸 | 379mm*210mm*45mm |
| 品牌 | DZE |
| 貨號 | |
| 用途 | 旋轉臺通用軸承 |
| 型號 | 01 0289 06 |
| 制造商 | 洛陽東軸 |
01 0289 06型號勞力士尺寸高精度DZE外齒轉盤軸承產品參數:
外徑 | 內徑 | 高度 | 重量 | 模數M | 齒數Z | 東軸型號:點擊型號查看圖紙 | 對應型號 | 備注 |
318 | 169 | 45 | 14 | 3 | 104 | LYDZ01-318 | 01 0235 00 | STD |
330 | 170 | 60 | 23 | 4 | 86 | LYDZ01-330 | 011.20.250 | STD |
360 | 200 | 60 | 27 | 4 | 94 | LYDZ01-360 | 011.20.280 | STD |
373 | 210 | 40 | 18 | 5/7 | 72 | LYDZ01-373 | MTE-210/MTE-210T | |
379 | 210 | 45 | 20 | 4 | 92 | LYDZ01-379 | 01 0289 06 | STD |



01 0289 06型號勞力士尺寸高精度DZE外齒轉盤軸承安裝前準備工作
Preparations for Installation
(1)確認轉盤軸承型號與合同訂單上的要求一致。
Make sure that the model same with the contract.
(2)檢查01 0289 06型號勞力士尺寸高精度DZE外齒轉盤軸承的包裝是否完好,確認轉盤軸承在運輸過程中沒有損壞。Check the package to ensure the integrity during thetransportation.
(3)應在清潔而干燥的環境中,打開轉盤軸承包裝,檢查轉動是否靈活。
Open the package in clean and dry environment, and check the rotate。
(4)安裝支架焊后應進行消除內應力熱處理,平面進行機械加工。
Inner stress and heat treatment should be removed afterinstalling bracket, process machine complanately.
(5)安裝支架必須有足夠的剛度,防止回轉支承變形,影響其使用。
The Bracket should have enough flexility to avoid the distortionof the slewing bearing and influence of its usage.
(6)01 0289 06型號勞力士尺寸高精度DZE外齒轉盤軸承安裝基準面和支架安裝平面必須清理干凈,去除油污、毛刺、油漆以及其它異物。
The installation datum plane and bracket installing plane shouldbe clean grease. burr, paint and other foreign bodys should be wiped off.

